CURRENTBODY
LED 4-in-1 Zone Facial Mapping Mask
LED 4-in-1 Zone Facial Mapping Mask
Smooth, brighten and restore with multi-wavelength LEDs
Couldn't load pickup availability
What you need to know:
What you need to know:
- 4 LED light therapy facial treatments in 1 mask, using 5 different wavelengths
- 360 high quality LED bulbs delivers optimal power
- LED Facial Mapping for zoned facial treatments designed to target different skin concerns
- Patented pillow technology evenly diffuses the LED light to ensure maximum skin coverage
- Double straps offer a more secure and more comfortable user experience
- Use 3 to 5 times a week to achieve desired results
Multicolumn
-
4-in-1 Zone Mapping Mask
- CurrentBody Skin 4-in-1 LED Face Mask
- USB-C Charging Cable
- Eye Inserts
- Strap & Storage Bag
- Controller
- User Manual
-
4-in-1 Mask & Neck Kit
- CurrentBody Skin LED 4-in-1 Zone Facial Mapping Mask (with standard contents)
- CurrentBody Skin Neck and Deck Perfector (includes CurrentBody Skin LED Neck and Dec Perfector, Controller, USB & Charging Cable, 2 Velcro Straps (1 Short, 1 Long) &User Manual)
-
Special 4-in-1 Zone Mapping Kit
- CurrentBody Skin LED 4-in-1 Zone Facial Mapping Mask (with standard contents)
- CurrentBody Skin Hydrogel Face Mask (5 Pack)
- CurrentBody Skin Green Tea Serum (30ml)
4-in-1 LED facial treatments
-
Visibly smooths lines & wrinkles (Anti-Ageing)
"My skin is glowing, my under eye circles are gone, I have fewer bumps, and my pores are much less noticeable. I’m really amazed!
-
Brightens skin tone (Brightening)
"The results so far have been amazing; reduced inflammation and redness, brightened complexion. So many benefits, so happy with the results so far."
-
Improves skin texture (Restoring)
"Perfect!!! I have been using it for two months now, and my skin feels refreshed and has returned to good condition."
LED Facial Mapping
Zone Facial Mapping, exclusive to the ‘Complete’ treatment on your device controller, strategically delivers specific wavelengths to targeted zones across the face effectively treating a range of skin concerns in one treatment.
Red (633nm), deep red (660nm) and near-infrared (830nm): Targets the forehead, jowls and around the mouth. Red LED light therapy is ideal for plumping the skin, while pressing fine lines and wrinkles.
Green (532nm) and near-infrared (830nm): Concentrated around the eye area to fade hyperpigmentation, dark circles and eye bags.
Yellow (590nm) and near-infrared (830nm): Focuses on the most spot-prone areas of the face to help reduce facial redness on the cheeks, nose and chin.
The 4 pillars of effective LED light therapy masks
There are 4 factors that determine the efficacy of an LED mask; power, precision, coverage and duration.
POWER: This is how much light emits from each bulb, determining how much energy comes into contact with the skin. Too much, and the skin cells may be damaged.
PRECISION: The optimal wavelength for activating cellular rejuvenation must be precise. As different skin concerns respond to different wavelengths (visualised as colours), every wavelength must be as precise as possible.
COVERAGE: This signifies how much of the skin is covered with LED light throughout the entire treatment. A mask with optimal coverage ensures complete, even light distribution over the entire skin’s surface.
DURATION: Calculated based on the above factors of power, coverage and precision. Too short a treatment time paired with a low power density is ineffective. A treatment time too long paired with a high power intensity, the skin may be damaged.
Patented pillow technology
Embedded with 360 LED bulbs, clinically proven wavelengths are diffused with patented pillow technology for complete skin coverage. This innovative technology enhances the efficacy and distribution of high quality LED wavelengths.
Unlike regular LED devices with poor light distribution, patented pillow technology provides an even coverage on the skin’s surface, leaving no gaps. This allows skin cells to effectively absorb the maximum amount of beneficial light energy for the best results possible.
Your questions, answered
How do I use the 4-in-1 LED mask?
Step 1: Conduct a sensitivity test (see contraindications) 24 hours before your first treatment.
Step 2: Ensure skin is clean, dry and free from creams and lotions.
Step 3: Secure and adjust the strap around your head.
Step 4: Select your treatment mode on the controller and turn on your device.
Step 5: Sit back and relax for your 10-minute session.
Step 6: Remove, wipe clean and safely store in the protective storage bag.
Step 7: Continue with the rest of your skincare routine.
Expert Advice: Use for 6 to 8 weeks to achieve desired results.
How often should I use the 4-in-1 LED mask?
We recommend you treat 3 to 5 times a week maximum, ideally with some break days.
Can I carry out back-to-back treatments?
We do not recommend carrying out more than one treatment consecutively or using more than once within a 24-hour period.
What happens if I feel discomfort?
If you experience excessive heat, discomfort or skin irritation during patch test or anytime whilst using the mask, discontinue and contact customer care.
Is there an age limit to using this mask?
We always recommend the CurrentBody Skin products for use over the age of 18.
How many uses are there per charge?
Approximately 3 hours of use.
How many LEDs are in this mask?
There are multiple wavelengths emitted per LED bulb; some have 5 chipsets, and some are 4, equating to 360 LED bulbs in total.
What is the irradiance of all the settings?
Red Irridance: 50.4mW/cm²
Green Irridance: 33.6mW/cm²
Yellow Irridance: 28.3mW/cm²
Can I use the CurrentBody Skin RF device as well as the 4-in-1 mask?
Yes. After cleansing skin and patting dry, secure the 4-in-1 Face Mask and relax for your 10-minute treatment. Once complete, apply a mask-like layer of radio frequency conductive gel and enjoy up to 70 minutes of skin tightening radio frequency.
Read more about red light therapy
-
LED light therapy: Everything you needto know
-
Red Light Therapy Before & After:
Pictures and Results
-
The top LED mask benefits for your skin
Collapsible content
Sensitivity test
Test yourself for light sensitivity prior to using, we recommend that you do this on your inner arm or thigh:
Step 1: Power on your device.
Step 2: Place the device on your arm and conduct a full 10 minute treatment, ensuring your skin is clean and dry before use.
Step 3: After 10 minutes, visually check the area. If the area has turned red and this lasts for more than 2 hours, your skin has a sensitivity to light. Return the device to CurrentBody within 14 days for a full refund.
Contraindications
DO NOT use this device to treat any other conditions apart from those listed in the indications for use. This device has not been tested for any other conditions than those listed, and the risk is unknown.
DO NOT use this device if you are pregnant, planning on becoming pregnant, or breastfeeding. This device has NOT been tested on pregnant or breastfeeding women and therefore the risk to the fetus, neonate, or pregnant women is unknown.
DO NOT use this device if you suffer from Lupus erythematosus, photosensitive eczema, or Albinism. If you use this device system to treat Lupus erythematosus, photosensitive eczema, or Albinism you may cause a severe skin reaction.
DO NOT use this device if you suffer from any photosensitive disorder (sensitivity to light). If you use this device and you suffer from a photosensitive disorder you may cause a severe skin reaction.
DO NOT use the device if you suffer from light-induced headaches.
DO NOT use the device if you suffer from any genetic conditions of the eye.
DO NOT use this device if you are taking any medication that can cause photosensitivity. If you use this device and you are taking any medication that can cause photosensitivity you may cause a severe skin reaction. Photosensitivity is a common side effect of various medications. These can include certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any medication you may be taking consult your healthcare provider. Other substances not listed above can also cause photosensitivity. Common examples of these substances are St John's Wort, Coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (moth balls), petroleum products, brightening agents found in laundry detergent, and cadmium sulfide (a chemical injected into the skin during tattooing).